Viewing / Downloading the Final Report

• Part1: pages i-vi, 1-20

  Choose document with: Low resolution (112Kb) or 400 dpi resolution (944Kb )
  for:

  • [Front Matter]
  • INTRODUCTION
  • BACKGROUND
    • A. CLOSE-RANGE PHOTOGRAMMETRY
      • 1. Surveying monuments and buildings
      • 2. Museum research and rock painting
      • 3. Modelling surfaces
      • 4. Biostereometrics and medical applications
      • 5. Underwater photography
      • 6. Monoscopic/convergent photogrammetry
      • 7. Photogrammetry in archeology
    • B. THE PHOTOGRAMMETRIC PROCESS
    • C. NON-METRIC VS. METRIC CAMERAS
      • 1. Lens distortion
      • 2. Need for a film flattening mechanism
      • 3. Defining the film position in the camera body
  
  
• Part2a: pages 21-50

  Choose document with: Low resolution (264Kb)
  
  or Two 400 dpi resolution documents Pages 21-30 (1.8 Mb) AND Pages 31-50 (1.7 Kb) for:
  
  

  • OVERVIEW OF THE PROCESS UTILIZED
    • A. THREE-DIMENSIONAL CONTROL FIELD
      • 1. Control frames for horizontal photograph
      • 2. Control frames for vertical photographs
    • B. ARTIFACT PREPARATION
      • 1. Shadow
      • 2. Object Texture
      • 3. Object Orientation
      • 4. Documentation
    • C. PHOTOGRAPHIC EQUIPMENT AND SETUP
      • 1. Camera body
      • 2. Lenses
      • 3. Film sensitivity, resolving power and longevity
      • 4. Camera movement system
      • 5. Light source and lighting method
      • 6. Exposure

• Part2b: pages 51-63

  Choose document with: Low resolution (256Kb)
  
  or Two 400 dpi resolution documents Pages 51-56 (2 Mb) AND Pages 57-63 (1.6 Mb) for:

  • D. PROCESSING DATA WITH A SOFTCOPY PHOTOGRAMMETRY SYSTEM
    • 1. Interior orientation
    • 2. Relative orientation
    • 3. Absolute orientation
    • 4. Stereo resampling and image analysis
  
  
• Part3: pages 64-82

  Choose this document (440 Kb) for:

  • RESULTS
    • A. SMALL OBJECTS AND SMALL VERTICAL CONTROL FRAME
    • B. SMALL/MEDIUM SIZE OBJECTS, LARGER VERTICAL CONTROL FRAMES
    • C. LARGER OBJECTS AND HORIZONTAL CONTROL FRAME
    • D. PRELIMINARY ASSESSMENT OF MEASUREMENT DEV. IN X, Y and Z
  • ALTERNATIVE METHODS
  • CONCLUSION
  
  
• Appendices

  Choose this document (28Kb) for:

  • APPENDICES
    • A. SOME IMPORTANT PHOTOGRAPHIC CONCERNS
    • B. TECHNIQUES TO SIMULATE 3-D EFFECT
    • C. C PROGRAM GENERATING DATA FOR THE PHOTOGRAPHIC SETUP
    • D. DATA COLLECTED DURING THE "BLIND TEST"
    • E. DATA TO ASSESS DEVIATIONS IN X, Y and Z
    • F. HELPFUL CHECK LIST
    • G. RECORDING FORM
  
  
• Glossary: Choose this document (21 Kb)
  
  
• References: Choose this document (16Kb)